|
|
| The
D4x GPS Module engine boards (measuring only 19x17mm) with its
highly sensitive RF module together with our active GPS antenna
works also indoor like i.e. in parking houses. Because of it's
sophisticated architecture, it gives the best price/ performance
ratio and can easily be integrated into any GPS projects without
the need of using any sockets or connectors as it can be soldered
direct to another PCB. |
 |
This
D4x GPS module is based upon SiRF StarIII G2 (2nd Generation)
chipset that involves 20 channels all-in-view technologies,
low power consumption, ultra low profile and fast time
to fix. |
|
|
For
those whom like to purchase a ready-to-use GPS board with
integrated power supply we recommend our WAY
D3x GPS engine board which is the same as WAY D3x
GNSS but without casing and D-sub connector.
|
|
APPLICATIONS
• AVL
- Automatic
Vehicle Location
• Vehicle
and
Assets Tracking
• Fleet
Management
• Car
and marine navigation
• GPS
data logging
• GPS
precise
timing - GPS clock
• Geo-referencing
for digital camera
|
For
more specification see our WAY D4x GPS at the link above.
Please note that there is two kind of D4x Modules available,
one with ready components and power supply (just connect power
and GPS antenna) while the other is the D4x "brick"
as shown on the image hereunder. |
|
|
For
more info, please send us an e-mail and we will send you full
product information of this 19x17 mm D4x GPS module. |
|
Features
and Specifications
|
| GPS
receiver: |
20
Channel GPS L1, C/A code |
| Tracking
sensitivity: |
-152dBm
(average) or better |
| Acquisition
sensitivity: |
-139dBm
(average) or better |
TTFF
(Time to First Fix): |
Cold
Start: 50s (average) / 60s (95% possibility) |
| Warm
Start: |
35s
(average) / 40s (95% possibility) |
| Hot
Start: |
2s
(minimum) / 6s (95% possibility) |
| Positioning
accuracy: |
Standard
Positioning Service (SPS), EGNOS (Europe) or WAAS (US) |
| 2DRMS: |
Approx.
1-5m |
| Time
accuracy: |
1µs
or less precision |
| Update
time: |
1Hz (1 time per second) |
| NMEA
output protocol: |
V.3.01 |
| Baud
rate: |
4800, 9600, 19200, 38400 bps (8-N-1) |
| Datum: |
WGS-84 |
| Type: |
GGA, GSA, GSV, RMC, VTG, ZDA, GLL |
| Power
consumption: |
39mA
(average) |
| Power
supply: |
3.3
VDC |
| Antenna
type: |
Active
GPS antenna |
| Dimensions: |
37mm
x 52mm x 21mm
(top case) |
| Operating
temperature: |
-40°C
~ +85°C |
| Storage
temperature: |
-55°C
~ +100°C |
D3x
Demo Module Kit Set
The WAY
D3x GNSS Demo Module Kit Set includes the WAY D3x GNSS module,
USB cable for 5VDC power, USB to RS-232 converter, RS-232
cable, active GPS antenna and Windows software where all this
forms a development kit for GPS reception. The Demo Module
Kit Set includes DLL's and other development tools for rapid
software developments using the WAY D3x GNSS. This kit includes
the appropriate WAY D3x GNSS module, an RS-232 motherboard
with serial port connector, serial port cable with attached
AC adapter power supply, interface software, and documentation.
Ordering
Number Product Product Information
|
Ordering
Number
|
Product
|
Product
Information
|
| D3xGPSV06-01 |
WAY
D3x GPS |
Complete
in aluTECH casing |
| D3xGPSV06-02 |
WAY
D3x GPS ANT |
Complete
in aluTECH casing w/GPS antenna |
| D3xGPSV06-03 |
WAY
D3x GPS PCB |
PCB
Module Only |
| D3xGPSV06-04 |
WAY
D3x GPS SW |
DLL
and Software for developments |
| D3xGPSV06-05 |
WAY
D3x GPS Demo |
Complete
H WAY D3x GPS Module with all cables, interfaces, antenna
and Development Kit |
|
D3xGPSV06-06
(BAT1200-01)
|
WAY
D3x GPS 3.7V 600mA
Internal Li-polymer battery
|
Internal
battery for WAY D3x GNSS |
|
|
 |
|
HARDWARE 
