|
The
DOLLXP32 SMART has following data:
- TTL/CMOS construction
and Technology
- Software programmable
10-bit address settings
- Software programmable
Data I/O
- Single voltage supply
- Long distance communication
(more than 300 meters)
- Built in non critical
oscillator for wide operating temperature range
- Easy interfacing with
wire, IR (Infra Red), RF (Radio Frequency), Fiber Optic
and UltraSonic transmission
- Easy to program (no
DMA or IRQ required) in i.e. VB
- Transmission rate:
160-180 Khz
- LED indication for
TX/RX
- Digital PCM wave form
I/O communication protocol
- 10 Address bits and
8 data I/O bits
- Maximum 1024 unique
addressable units with 8-bit binary data (max. 8192 switches)
- 8-bit ISA Bus with
SMD Technology
- SRC-ID for secure and
unique SRC's (Switch Response Code)
- Easy installation with
PnP style
- 6P4 telephone connectors
and 4-wire cable for the DOLLx8 SMART I/O
- Low Cost
The
DOLLXP32 SMART Interface use SMD (Surface Mount Devices)
components for its compact design and all its components are
manufactured by well know companies like Philips, SG-Thomson
and Omron.
Get
the full version of DOLLXP32.DLL
for just €38.00 |
 |
|
|
Installation
Note:
The
18-bit DOLLx8 data is split into 3 groups:
- 8-Bit
SRC (Switch Response Code)
- 2-Bit
SRC-ID (Switch Response Code Identity)
- 8-Bit
Data I/O
However if 16-bit of
data is needed two external DOLLx8 SMART interfaces units with
different SRC-ID can be used and you can receive or send data
as 2*8-bit split into LSB and MSB (Least
and Most Signified Bits)
The DOLLXP32 SMART Interface
board fits into one 8-bit ISA slot in your PC. The connector
used for the I/O bus is one standard 6P4 telephone connector
(US type) using 4-wire standard telephone cable. On the card
you will find two LED's indicating TX
- GREEN (Transmit - Encoder MODE) and RX
- RED (Receiver - Decoder MODE).
Each card includes Windows9x/NT/2000
software which is also free for download from our web site.
The maximum length between
the units and the computer is 300 meters. You can have maximum
1024 DOLLXP32 SMART units with unique SRC addresses in each
DOLLXP32 SMART Network. These units gives you a maximum of
8192 unique switch combinations.
|
HARDWARE 
